Шлюз WirelessHART Fieldgate SWG70, Endress+Hauser

Шлюз WirelessHART Fieldgate SWG70, Endress+Hauser
Попереднє замовлення
Доступне передзамовлення
Endress+Hauser Виробник: Endress+Hauser
Без ПДВ: 0.00UAH

Intelligent WirelessHART gateway with Ethernet and RS-485 interfaces

Field of application

Endress+Hauser's WirelessHART Fieldgate SWG70 has been designed to act as interface between a system using Ethernet or RS-485 physical layer and WirelessHART network. The gateway is designed for mounting in explosion hazardous areas Zone 2. An integral or remote antenna can be mounted according to the needs of the application.

Process optimization, Tank and silo monitoring/Inventory control, Condition monitoring of equipment. The WirelessHART gateway converts and stores wireless device data in a format that is compatible with other systems. It has Ethernet and serial interfaces for connection to host applications such as Plant Asset Management and SCADA tools.

    Benefits

    • Easy commissioning and diagnosis of a self-organizing WirelessHART network

    • Seamless integration of field device information into superior system applications with standardized protocols, such as MODBUS, EtherNet/IP, HART-IP or OPC

    • Wireless configuration and administration of intelligent field devices in the plant by using FieldCare

    • Flexible Fieldgate operation in ex-hazardous areas in the plant

    Specifications

    Measuring principle

    WirelessHART

    Function

    Intelligent WirelessHART gateway with Ethernet and RS-485 interfaces

    Certification

    Non-hazardous area, ATEX, IEC Ex

    Input

    WirelessHART communication interface
    Transmission rate: Nominal 250 kBits/s
    Operating frequency: 2.4 GHz (ISM band)
    Transmission range under reference conditions:
    Outdoor 250 m, indoor 50 m



    Output

    Ethernet (10 BASE-T/10 BASE TX)
    - Configurable for HART IP and MODBUS TCP communication
    RS-485 serial interface
    - Configurable for HART Version 7.0 or MODBUS RTU communication
    EtherNet/IP interface

    Auxiliary power supply / Loop power supply

    20 VDC to 30 VDC

    Dimensions (wxhxd)

    W x H x D:
    257 mm x 85 mm x 285 mm with cable glands and antenna
    257 mm x 85 mm x 115 mm without cable glands and antenna

    Software

    Internal software for controlling the WirelessHART network including web interface for configuration.

    Operation

    Integral via Pushbuttons
    PC configuration:
    - Web browser via Ethernet
    - FieldCare via Ethernet (HART IP CommDTM) or RS-485 (S-MUX DTM)

    Display

    Integral via 5 LEDs

    Operating Voltage

    20 VDC to 30 VDC

    Nominal current

    <5 W